A number of presentations are online
Wilsonart Product Education
(Available In Select Markets)
Composite Panel Association Product Education
Lotte Chemical CEUs
Staron | Next Generation Solid Surface
Radianz | An Overview of Engineered Quartz Surfaces
© 2020 DesignOneSource Terms & Conditions
Thermally Fused Laminate for interior and furniture applications is available in an extensive range of Unilin Evola decors.
Available from stock in all Unilin Evola decors in perfect color match with HPL faced board and edgebanding.
Easy to clean
Resistant to UV light
Easy to process
Standard sizes are 81”×110” and 49”x121”
Radianz Quartz sheets are
60″ (wide) x 122″ (long) in 2 cm (thickness)
60″ (wide) x 122″ (long) in 3 cm (thickness)
Jumbo Quartz slabs are available:
63″ x 126″ in 2 cm (thickness)
63″ x 126″ in 3 cm (thickness)
Staron sheets are
1/2″ (thick) x 30″ (wide) x 145″ (long)
Also available 1/4″ x 30″ x 98″
Architectural Specification Rep
North American Specification Manager
Sizes: 4′ x 8′ & 5′ x 9′
Width: 49” & 61” (1245 mm & 1549 mm)
Length: 97” & 109” (2464 mm & 2769 mm)
Thickness: 1/4” to 1 1/2” (6 mm to 38.10 mm)
TFL decorative panels are manufactured in one step. Top and bottom impregnated decorative layers are pressed and permanently thermofused to particleboard or MDF. Large steel press plates are used during this process to create the surface texture. The finished panels are ready for use.
Description:The decor Champagne Hard Maple is a Canadian maple that shows naturally planked elements and a lot of color play, allowing for a variety of combinations. At the same time, a slight mother-of-pearl shine ensures a proper striking effect.
Collection:EGGER Decorative Collection 2017-2019
Color & decor worlds:Modern Classic
Surface Texture:ST9 Smoothtouch Matt
Decor group:Wood Reproductions
Grain direction:Vertical grain
Dimensions panel: 2790×1240 mm
Thickness veneer top layer: 0.6 mm / 1,5 mm
Total thickness panel: 19 mm / 20.5 mm
Dimensions flex: 2750×1220 mm
A Nørdus panel is composed of a top layer of real wood veneer, a core of 18 mm MDF and a backing of real wood veneer for stability reasons. The top layer is always a jointed veneer sheet in accordance with the chosen design, composed using our mix match technique. In this process, strips of veneer wood from various trees with varying cutting methods are randomly jointed into a full sheet. This way, the panel looks like solid wood. By creating a continuous surface with various panels, there is no optical interruption.
The Nørdus products are always delivered unfinished and should yet be treated by the processor.